Things To Consider While Buying LiPo Battery Chargers
LiPo battery chargers are the ones that are used to charge Lithium Polymer batteries. These are the batteries that you will find in modern consumer electronic devices. It is extensively used in the radio control and communication industry. It is very reliable and durable.
There are a lot of companies that are manufacturing both LiPo batteries and LiPo battery charges. Since the predominant electronics are using LiPo batteries, the use of LiPo chargers is inevitable. So while buying LiPo battery chargers, there are a lot of things that you need to take into account which we will see in this article. Check out www.product145.com to get better ideas about LiPo chargers.
Balance Charging
Almost all of the LiPo chargers have the capability to perform balance charging. Balance charging is a process in which the charger will make sure that all the cells in the battery are charged with equal voltage. This is one of the most important factors that you need to take into account because if the cells are charged with different voltage, then there are possibilities that the battery will be damaged or else the battery life will be affected in the long run.
Cell Compatibility
When you are buying the charger make sure that it is compatible with the battery that is used in the device. There are possibilities that sometimes it will not support the battery in the device. Some cheap charges are only capable of supporting 2s or 3s LiPo batteries. A little bit expensive ones will support all kinds of batteries that range from 1s batteries to 6s batteries. There are also a few fancy and expensive chargers in the market that is capable of supporting and balance charging more than a single LiPo battery at the same time.
Charging Current
Generally, the LiPo batteries have the maximum charge rate specified as 1C, 2C and so on. But in chargers, you will find the charge rate in Amps. There are possibilities to get confused between these two values. Hence to avoid the confusion, it is better to convert the charge into amps. For that, all you need to do is just multiply the battery capacity with the C rating. For example, if the battery capacity is 2.2Ah and the C rating is 2 all you need to do is 2.2 x 2 = 4.4. If you are not choosing the appropriate charger, it will have a big negative impact on the battery and also the device.
Power Supply
There are few batteries in the market that has a built-in power supply. Hence you do not have to worry about it. But if the battery is not equipped with power supply, you need to make sure that you buy the perfect charger for it. Make it a point to look for the correct watts. If you are messing up in this aspect, then there are possibilities that your charger might not work properly, or it will affect the device.